Building Veneer Stone is used to veneer the face of a building or house and is mortared in place. It comes in a variety of grades. Full building stone is intended to be laid on a ledge and is usually 4” in depth. Natural thin veneer is natural stone with the face sawn off. This stone is used where ledges are not available for a regular full-size building stone.
Coverage:
- 1” - 2” Thin Veneer Stone equals 80-120 Square Feet Per Ton
- 3” Full Veneer Stone equals 50-60 Square Feet Per Ton
- 4” Full Veneer Stone equals 30-40 Square Feet Per Ton
- 5” Full Veneer Stone equals 25-30 Square Feet Per Ton
- Split Face Stones 2 1/4” - 5” 7 3/4” equals 35-45 Square Feet Per Ton
Joint spacing wall will affect final square footage per ton calculations.
Because NATURAL stone is recognized as a high quality building product, it adds value to your home. In the event that full veneer NATURAL stone is more than you need, our Natural Thin Veneer is the perfect alternative. Cut at a thinner dimension than full veneer stone, NTV is lighter in weight yet just as durable and visually striking, and can be installed in about half the time. For more information on our NTV products ask your Coffman salesman.
|
|
|
|
|
|
Please visit the downloads page for a full list of Veneer Stone specification documents.
|
|
|
Images of Veneer Stone:
|
